My Notes

1. Spot Drill & Drilling
2. Drill cycle options
3. Advanced Drill part 1
4. Advanced Drill part 2
5. Chamfer Drill
6. Ream & Countersink
7. Circle Mill
8. Thread Mill - External
9. Thread Mill - Internal
10. Slot Mill
11. Helix Bore
12. Tapping
13. Change at point
14. Automatic Linking for holemaking toolpaths
15. Selecting hole features and Hole Segments for holemaking operations

HLE
HLE Compatible. What's This?
Hole Making Toolpaths

Feedback Feedback Feedback Feedback Feedback Feedback Feedback Feedback Feedback Feedback Feedback Feedback Feedback Feedback Feedback

or Register to watch

This video requires a Pro subscription to watch

15 Videos (2h 17m)

1. Spot Drill & Drilling

12m
2. Drill cycle options

5m
3. Advanced Drill part 1

14m
4. Advanced Drill part 2

14m
5. Chamfer Drill

8m
6. Ream & Countersink

9m
7. Circle Mill

9m
8. Thread Mill - External

7m
9. Thread Mill - Internal

10m
10. Slot Mill

6m
11. Helix Bore

10m
12. Tapping

8m
13. Change at point

11m
14. Automatic Linking for holemaking toolpaths

4m

1246-24 Automatic Linking can simplify linking parameters for holemaking toolpaths. By setting retract and clearance heights based on the solid model, Mastercam creates safe linking moves with minimal effort.
15. Selecting hole features and Hole Segments for holemaking operations

9m

My Notes

1. Spot Drill & Drilling
2. Drill cycle options
3. Advanced Drill part 1
4. Advanced Drill part 2
5. Chamfer Drill
6. Ream & Countersink
7. Circle Mill
8. Thread Mill - External
9. Thread Mill - Internal
10. Slot Mill
11. Helix Bore
12. Tapping
13. Change at point
14. Automatic Linking for holemaking toolpaths
15. Selecting hole features and Hole Segments for holemaking operations

About This Lesson

In this lesson, you will learn about all of the Hole Making Toolpaths in Mastercam including: Drill (Tap and Ream), Chamfer Drill, Advanced Drill, Thread Mill, Helix Bore, Slot Mill, Counter Sink and Change At Point.

Charlie Lettenmaier

27+ years experience as a programmer and...
Full Profile
Charlie Lettenmaier

27+ years experience as a programmer and...
Full Profile
Charlie Lettenmaier

27+ years experience as a programmer and...
Full Profile
Charlie Lettenmaier

27+ years experience as a programmer and...
Full Profile
Charlie Lettenmaier

27+ years experience as a programmer and...
Full Profile
Charlie Lettenmaier

27+ years experience as a programmer and...
Full Profile
Charlie Lettenmaier

27+ years experience as a programmer and...
Full Profile
Charlie Lettenmaier

27+ years experience as a programmer and...
Full Profile
Charlie Lettenmaier

27+ years experience as a programmer and...
Full Profile
Charlie Lettenmaier

27+ years experience as a programmer and...
Full Profile
ST Staff Member

StreamingTeacher, Inc. Staff Member
Full Profile
ST Staff Member

StreamingTeacher, Inc. Staff Member
Full Profile
Charlie Lettenmaier

27+ years experience as a programmer and...
Full Profile
John Stauffer

John is the Applications Engineer at MCA...
Full Profile
John Stauffer

John is the Applications Engineer at MCA...
Full Profile

About This Lesson

What's New in 2023 - Mill

This site is best viewed in a modern browser