HLEHLE Compatible. What's This?
Hole Making Toolpaths
15 Videos (2h 17m)
- 10m2512-23 How to create a helix bore toolpath, analyze entity, use selection dialogue, selecting appropriate tools, assigning tool holder, cutter compensation, override geometry diameter, start angle, sweep angle, perpendicular entry, rough pitch, rough passes, feedrate override, finish method, finish passes, output arc moves for helix, linking parameters.
- 8m
Other Lessons to Consider
Lathe Introduction
In this group, learn how to set up to program Lathe in Mastercam. Machine selection, Lathe coordinate system, Job setup, Stock, Jaws and Lathe Tools...
Total Videos: 16 1h 51m
Get StartedHLE 
Multi Axis 3+2 Five axis machining
Learn the specifics of 3+2 machining in this group. Learn how to use planes and other settings to make efficient programs for Multi Axis machines.
Total Videos: 2 17m
Get StartedHLE 
3D Toolpath Parameters
In this group, you will learn all about Mastercam’s Milling parameters that are specific to 3D. A good understanding of these settings are key to...
Total Videos: 9 1h 5m
Get StartedHLE 
Toolpath Transform
This group covers the Mastercam Toolpath Transform function. Toolpath Transform is a powerful tool that allows you to take an existing toolpath, or a group...
Total Videos: 9 1h
Get Started