Version Library

7 Results

Lessons

HLE Getting Started Project - CAM
Mastercam 2021 Library
Getting Started Project - CAM

This is a quick Start group for CAM. By continuing with the CAD Model you have already created from the “Getting Started Projects - CAD”...

Total Videos: 11 1h 42m
Get Started
HLE Defining Mill Tools
Mastercam 2021 Library
Defining Mill Tools

In this lesson group, you will learn how to set up cutting tools for milling in Mastercam. This includes all CAM applications that have a...

Total Videos: 8 1h 14m
Get Started
HLE Facing Toolpath
Mastercam 2021 Library
Facing Toolpath

This lesson covers the Mill Facing toolpath. This is one of the most commonly used toolpaths in industry. There are many cutting options and settings...

Total Videos: 1 9m
Get Started
HLE 2D Mill Toolpaths
Mastercam 2021 Library
2D Mill Toolpaths

In this lesson, you will learn about the 2D toolpaths in Mastercam Mill. These toolpaths are also used for Router, Lathe with Mill and and...

Total Videos: 10 1h 19m
Get Started
HLE 2D HST & Dynamic Toolpaths
Mastercam 2021 Library
2D HST & Dynamic Toolpaths

In this group, you will learn about the Industry standard "Mastercam Dynamic" Toolpath type. This is a material removal strategy that can be used on...

Total Videos: 13 1h 37m
Get Started
HLE Hole Making Toolpaths
Mastercam 2021 Library
Hole Making Toolpaths

In this lesson, you will learn about all of the Hole Making Toolpaths in Mastercam including: Drill (Tap and Ream), Chamfer Drill, Advanced Drill, Thread...

Total Videos: 13 2h 2m
Get Started
HLE Pocket Toolpath (Legacy)
Mastercam 2021 Library
Pocket Toolpath (Legacy)

This lesson covers the Pocket (Legacy)  toolpath. This is one of the oldest toolpaths in Mastercam and has been for all practical reasons, replaced by...

Total Videos: 4 16m
Get Started

How to get the most out of your Streamingteacher account

This site is best viewed in a modern browser

×