Project Library

Timed challenge - 4th axis drilling

Timed challenge - 4th axis drilling
3 Videos (12m)

About This Project

This challenge is for Multi Axis, but applies to add products that include drilling. When drilling a lot of holes, it good to understand some of the features built into Mastercam. Can you get all the drilling programmed for this part in under 8 minutes?

Other Projects to Consider

Wire EDM partial cuts
Wire EDM partial cuts

This project is for Wire. It is challenging you to remove the excess cut and thread points in a wirepath to make a more efficient...

Total Videos: 3 11m
Get Started
Move from 3 Axis Vertical to 4 Axis Horizontal
Move from 3 Axis Vertical to 4 Axis Horizontal

This project is for Mill. It is challenging you to take an existing 3 axis vertical job and move it to a 4 axis horizontal...

Total Videos: 3 11m
Get Started
Critical Sharp Corners
Critical Sharp Corners

This project is for mill, it is challenging you to create loops outside of sharp corners to maintain their sharp edges perfectly.

Total Videos: 3 8m
Get Started
Toolpaths and Solid operation sequencing
Toolpaths and Solid operation sequencing

This challenge is for Mill. In this challenge, we learn how to link toolpath operations to different points in the history of a solid. 

Total Videos: 3 9m
Get Started

This site is best viewed in a modern browser

Google Chrome
Firefox
×