HLE Lathe and Mill - Cross Milling

Lathe and Mill - Cross Milling
3 Videos (27m)
  • 8640-19 How to create a cross milling operation in lathe, use analyze dynamic, create/add new toolpane, create plane from solid face, rename plane, home menu, lathe milling menu, facing operation, solid face selection, select mill tool, edit cut parameters, zig zag style method, edit travel angle, reduce overlap, linking parameters, edit planes in toolpath operation, add depth cuts, rotary axis control, verify simulation of cross milling operation.

About This Lesson

Lathe and Mill - Cross Milling

This site is best viewed in a modern browser

×