3633-19
Part 2 of 2, finish programming the introduction to 3D HST part, create new toolpath group, copy operations, operation settings from previous operation, reselect toolpath type, horizontal area toolpath, select tool, define cut parameters, climb milling, set depth cut, set arc filter tolerance setting, set transitions, regenerate toolpath, display selected toolpaths, set tool containment boundary, select raster toolpath, use linked edges in chaining, add chain, cut style zig zag, edit stepover, turn off add offset distance, specify offset distance, set steep/shallow angle, select waterline toolpath, select scallop toolpath, cut style one way, use option to keep tool down, use z depths, use data entry shortcuts, select pencil toolpath, limit the number of offsets.